OneFilter

Quickly find elements between Levels and Reference Planes.

Table of contents

1. Levels
   1. Select Category
   2. Find Elements
      1. Search
      2. Update or duplicate view
      3. Save Selection
      4. Isolate Selection
      5. Reset
      6. Visualize
      7. Contains
      8. Select

---

Levels

The Levels tab allows the user to select categories of elements to find between Levels and Reference Plane.

Select Category

1. The first step is to select whether you want to apply filters based on the Whole Model or the Active View. Select the radio button to choose the view.

_{Note: the version on the image may not reflect the latest version of OneFilter/DiRootsOne.}

1. Now, use the checkboxes to select the categories to filter. Note that, once you have selected the categories, on the right table will show the existing families, with the category, family name, type name, Level and count columns.

_{Note: the version on the image may not reflect the latest version of OneFilter/DiRootsOne.}

Find Elements

Create conditions rules to find elements between Levels and Reference Planes. Follow the steps:

1. Select the AND/OR condition from the drop-down list

2. Click Add Rule

3. Select from the Reference level or Reference plane drop-down list

Once you have selected it, define whether you want to find elements above or below the selected level/reference plane and then enter the name of the level/reference plane in the text input. Please note that in some cases the reference plane may not be renamed, so use the Select button to choose the reference plane manually.

1. Repeat the last step by selecting the corresponding reference level/plane to find elements between the two selected situations.

_{Note: the version on the image may not reflect the latest version of OneFilter/DiRootsOne.}

1. Click on the Filter button to execute the rule condition.

_{Note: the version on the image may not reflect the latest version of OneFilter/DiRootsOne.}

1. Click the Clear button to reset the condition of the rule you created.

_{Note: the version on the image may not reflect the latest version of OneFilter/DiRootsOne.}

Search

The search box will search for elements contained in the filtered elements table.

_{Note: the version on the image may not reflect the latest version of OneFilter/DiRootsOne.}

---

Update or duplicate view

Mark with checkbox elements that you want isolate with the Section Box. You have the ability to use existing or to duplicate 3D view. Visualize only filtered elements or all elements within Section Box with ability to define offset form marked elements.

• In the first list, select a view
• Set an Offset buffer from the section bounding box
• You can replace the selected view, or can select the Duplicate Selected View checkbox.
• Rename the duplicate view.
• Select the Isolate Selected Elements checkbox, to save the view with the isolated elements.
• Click the Apply button to finish.

_{Note: the version on the image may not reflect the latest version of OneFilter/DiRootsOne.}

---

Save Selection

Click on Save Selection button, and enter the name of the selection to save it. Note that, if you go to the Manage menu in Revit and click on the Load button, the new selection you have created will appear.

_{Note: the version on the image may not reflect the latest version of OneFilter/DiRootsOne.}

---

Isolate Selection

The Isolate Selection button, will isolate the filtered elements in a Temporary Hide/Isolate view. Click on Unisolate Selection to restore the view.

_{Note: the version on the image may not reflect the latest version of OneFilter/DiRootsOne.}

Reset

The Reset button will clear all the filters applied on Levels tab.

_{Note: the version on the image may not reflect the latest version of OneFilter/DiRootsOne.}

Visualize

Click on Visualize button to navigate to the Visualize tab, recording the filtered elements.

_{Note: the version on the image may not reflect the latest version of OneFilter/DiRootsOne.}

Contains

Click on Contains button to navigate to the Contains tab, recording the filtered elements.

_{Note: the version on the image may not reflect the latest version of OneFilter/DiRootsOne.}

Select

Click on Select button to select the elements in the current view.

---

If you want to find out more about OneFilter and explore detailed tutorials on how to use it, visit our YouTube channel. There, you’ll find a series of videos that can help answer questions and improve your knowledge. Be sure to check it out and subscribe to keep up to date with our news and tips!

DiRoots Channel